Penetrator Specifications
Specifications:
CURVED TYNE
43° curved edge-on 50mm x 25mm factory forged shank with 2 x 1/2” bolt holes @ 1 3/4” to 2 1/4" centres.
| |
With 300mm Sweep
@ 770mm clearance
|
With Spear point
@ 845mm clearance |
| Tyne breakout w/spring |
2.2 kN (500 lbf) |
2.0 kN (450 lbf) |
| Tyne breakout w/hydraulic |
2.9 kN (650 lbf) |
2.6 kN (585 lbf) |
| Under frame clearance |
770mm |
845mm |
| Jump height |
345mm |
355mm |
| Maximum working depth* |
145mm |
220mm |
| Transport clearance |
305mm |
230mm |
STRAIGHT TYNE
- Option 1: 43° edge-on 50mm x 25mm multi-function factory forged adjustable shank with 2 x 1/2" bolt holes @ 1 3/4" to 2 1/4" centres. Note: Tyne may be adjusted from 725mm to 840mm with 300mm sweep fitted.
- Option 2: Edge-on 50mm x 25mm direct drill adjustable shank.
| |
With 300mm Sweep
@ 725mm clearance |
With Spearpoint
@ 800mm clearance |
| Tyne breakout w/spring |
2.3 kN (520 lbf) |
2.1 kN (480 lbf) |
| Tyne breakout w/hydraulic |
3.0 kN (690 lbf) |
2.7 kN (615 lbf) |
| Under frame clearance (adjustable) |
725/840mm |
800/915mm |
| Jump height |
325/360mm |
335/370mm |
| Maximum working depth* |
195mm |
270mm |
| Transport clearance |
255/370mm |
180/295mm |
Tool Bar RHS 100mm x 100mm x 9mm
*Varies under different working conditions.
Gyral Implements Pty Ltd reserves the right to change any of these specifications without prior notice.
View or Print a Full Specification Sheet on the Gyral Penetrator.